Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

T150 VDE two-pole voltage tester 6-690 volts continuity tester up to 400 kohms

T150 VDE two-pole voltage tester 6-690 volts continuity tester up to 400 kohms

1062384102 T150 VDE two-pole voltage tester 6-690 volts continuity tester up to 400 kohms
Bild
Bild
Item no: 1062384 102 

Online price:

Available for immediate delivery

Application
Four detection methods for AC/DC voltages
1. Clear display of status and measured values via LEDs
2. Measured value displayed on bright digital display
3. Continuity test with audible signal
4. Vibration sensor provides tactile feedback

Execution
  • Measured value display with backlight
  • Battery voltage display
  • Voltage detection even with empty batteries
  • Improved mounting of measuring tips for safe storage
  • Rotary field indicator for three-phase systems
  • RCD testing function
  • Measured value can be held on the display
  • Built-in electric torch
  • Sliding probe tips
  • Protection for probe tips and accessories during storage
    • Detection of damaged measuring leads with WearGuard™ insulation

    • Approved in accordance with IEC 61243-3, VDE 0682 Part 401

Advantage
  • A load can be engaged using the secondary button in order to pull a higher current from the circuit being tested and trigger residual current devices (RCDs)
  • Rapid determination of current-carrying conductors by means of single-pole phase test
  • The guard allows you to always keep one hand free when opening safety power outlets

Delivery
2 x AAA (LR03) batteries
2 x GS38 test tip guards
2 x 4 mm test tip extensions
Operating instructions

Notes
For replacement batteries, see art. no. 1039900 304.

Brand: FLUKE
Min./max. voltage range DC: 6-690 V/DC
Type: T150 VDE
Min./max. voltage range AC: 6-690 V/AC
Display: LCD
Max. continuity test: 400 kOhm
Min./max. frequency: 0 / 400 Hz
Min./max. continuity test: 0-400 kOhm
Min./max. electrical-resistance measuring range: 0 Ohm-1999 Ohm
Rotating field test: No
Polarity testing: Yes
Vibration control system: Yes
Measurement point lighting: Yes
IP protection class: IP 64
Length x width x height: 230 x 70 x 38 mm
Weight: 180 g
Overvoltage protection category: CAT III/690 V | CAT IV/600 V
Height: 38 mm
Length: 230 mm
Max. electrical-resistance measuring range: 1999 Ohm
Max. frequency: 400 Hz
Min. continuity test: 0 kOhm
Min. frequency: 0 Hz
Non-contact test: No
Width: 70 mm
Diode testing: No
Resistance measurement: Yes

Manufacturer part no.: 4093109

EAN no.: 0095969610513

Product Datasheet
Keywords:

Often bought together

  • VDE Einpoliger Spannungsprüfer 70x3,0x0,5 150-250 Volt mit Schraubendreher
  •
    DUSPOL analog plus two-pole voltage and continuity tester 12-1,000 V AC/DC
  •
    VDE Einpoliger Spannungsprüfer 42x3,5x0,5 150-250 Volt mit Schraubendreher
  •
    DUSPOL digital two-pole voltage tester 1-1,000 V AC/1,200 V DC (TRUE RMS)
  •
    DUSPOL expert two-pole voltage and continuity tester 12-1,000 V AC/DC
  •
    VT Digi Pro digital multi-function tester 1-1,000 volts
  •
    VT Master two-pole voltage tester 12-690 volts

No workshop should be without it:

  •
    ATORN 1/4 inch hexagon socket with flexible blade
    12,17 €
  • ATORN A-Shield 2 cut protection glove, size 9
    6,86 €
  • Industrial atomiser type R36.501 with 360° suction system
    22,09 €
  • ATORN dial gauge, 10 mm meas. diff. 0.01 mm graduation shock-res, dia. 58 mm
    50,96 €
  • ATORN countersink set 90° HSS, extremely unequal pitch 6.3-20.5 mm
    176,70 €
  • Ergonomic safety double lock knife SECUPRO 625
    35,18 €
  • Spiralbohrer-Satz Sprint Master 19tlg. DIN 338 HSS Ø 1,0-10,0 mm in Kassette
    51,07 €
  • Octagonal pin punch set 6 pieces dia. 2-8 mm in stand
    41,40 €
  • ATORN cross-peen hammer 1,000 g with 3-component handle
    28,51 €
  • Set of flat hand engineer's files with handle, 5 pieces, L=200mm, German cut 2
    75,20 €
  • ATORN vernier calipers IP67 electr. 150 mm depth gauge flat
    187,86 €
  • ATORN A-View 2 safety glasses
    6,90 €
  • LOCTITE 243 threadlocker 50 g
    61,60 €
  • ATORN hexagon screwdriver set, ball head set, 5 pieces, 3–8 mm
    29,07 €
  • Pliers set, 3 pcs Combination pliers, snipe nose pliers, side cutters
    75,95 €
  • ATORN A-Shield 3 cut protection glove, size 9
    7,30 €
  • Profi-line intensive brake cleaner spray can 500 ml pack=15 cans
    108,33 €
  • ATORN PZ screwdriver set, 3 pcs, PZ 1-3, round blade
    17,94 €
  • ATORN HSSE machine tap set M3-12 HSSE DL
    145,96 €
  • ATORN A-Mech 4 assembly glove, size 9
    3,78 €
  • ATORN reusable corded ear plugs
    1,70 €
  • TX® screwdriver set 9 pieces T10-50
    131,90 €
  • ATORN cutter blade with 18-mm snap-off blade, metal housing, with slide
    17,43 €
  • ATORN wooden folding rule, white 2 m EC class III, with angle scale
    7,49 €
  • ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm
    176,70 €
  • ATORN flat square, stainless 150 x 100 mm in line with DIN 875 precision 1
    18,86 €
  • Blade scraper Argentax with extra wide handle replaceable blades
    7,84 €
  • ATORN countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank
    225,06 €
  • ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm
    212,04 €
  • Safety goggles MAX A1 lens clear
    7,90 €
  • ATORN bit box 32 pcs, slotted, PH, PZ, hexagon socket, TX, with holder a. handle
    55,44 €
  • Pliers wrench 250 mm up to AF 52 mm 19x position box joint
    49,63 €
  • Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6
    17,78 €
  • T-handle 411 A RA T-handle
    58,22 €
  • ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 in box
    200,20 €
  • Safety goggles MAX C4 lens clear
    4,50 €
  • Pliers set, 3 pcs comb. pliers, side cutters, high-tech water pump pliers
    57,44 €
  • Multifunction spray WD-40 400 ml
    9,36 €
  • ATORN banded ear plugs, 32 dB
    4,20 €
  • Safety goggles MAX T7 lens clear
    9,70 €
  • Kegelsenker-Satz 90° HSS-TiAlN Form C ungl. Teilung 3 Spannflächen Ø 6,3-25,0 mm
    182,04 €
  • Twist drill bit set HSS-E Co5 1-13 mm 0.5 mm incremental 25 pieces
    310,78 €
  • Caramba high-performance PTFE 500 ml spray can
    20,68 €
  • ATORN screwdriver set in workshop stand, 7 pieces
    62,05 €
  • ATORN analogue scriber 600 mm with fine adjustment
    630,00 €
  • Spray bottle refillable 227 ml max. operating pressure 8 bar 0.4 kg
    56,80 €
  • ATORN try square stainless 150 x 100 mm in line with DIN 875 precision 1
    34,04 €
  • Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces
    170,56 €
  • ATORN corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m
    32,21 €
  • ATORN disposable ear plugs, 200 pairs
    28,00 €
  • ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10 mm 0.5 in box
    92,82 €
  • Tabletop scales type FCE 15 K5 w/LC display reading 5g max. weighing range 15kg
    128,30 €
  • Pneumatic special oil 100 ml silicone-free with locking cap
    7,30 €
  • ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10.5 mm 0.5 and CHD
    181,09 €
  • ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm
    0,95 €
  • ATORN ear plug dispenser
    34,90 €
  • ATORN A-Mech 1 assembly glove, size 9
    1,72 €
  • ATORN centre drill set HSSE TiALN form A, D=1-1.6-2-2.5-3.15-4-5
    252,08 €
  • ATORN countersink set, 90°, HSS, extremely unequal pitch 6.3-20.5mm, 3-flat shnk
    180,42 €
  • ATORN hexagon screwdriver set, 9 pieces, 1.5–10 mm, with ball head, long
    19,21 €
  • ATORN cross-peen hammer 1,000 g, hickory handle, nylon handle protect. sleeve
    19,18 €
  • ATORN twist drill bit set N HSS TIN head DIN 338 1.0-10.0 mm in assortment case
    589,30 €
  • ATORN centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5
    81,88 €
  • Funnel set 6 pieces dia. 50, 75, 100, 120, 150, 160 mm polyethylene
    16,00 €
  • ATORN steel cutting disc 125x1 mm
    1,31 €
  • 3D art. meas. stand with central clamping and micro fine adj., height 390 mm
    254,54 €
  • ATORN quick-change bit holder, 1/4 inch x 60 mm
    16,37 €
  • ATORN A-Mech 3 assembly glove, size 9
    2,77 €
  • ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10.5 mm 0.5 and CHD
    140,14 €
  • ATORN A-Mech 2 assembly glove, size 9
    2,46 €
  • ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm 3-flat shnk
    182,28 €
  • ATORN disposable ear plugs, 400 pairs
    51,00 €
  • ATORN ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch
    98,56 €
  • Pneumatic micro die grinder 9032 M air consumption 75 l/min length 132 mm
    112,00 €
  • ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 in box
    169,26 €
  • Protective vice jaw set 125 mm 8 pieces in bag
    67,15 €
  • Cs. + cs. deburring tool set 6 pcs 90° HSS/TiN 6.3-20.5 mm in plastic box
    166,46 €
  • Lamella flap disc Z SG POWER STEELOX, dia. 125 mm, alumina zirconia, 40 grit
    6,30 €
  • ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10.5 mm 0.5 and CHD
    120,12 €
  • ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10 mm 0.5 in box
    149,24 €
  • ATORN twist drill bit set N HSS TiN head DIN 338 1.0-13.0 mm 0.5 in box
    204,18 €
  • ATORN bit socket wrench set, 6 pieces, hexagon head
    43,47 €
  • Metal saw bow for 300 mm saw blade length
    22,94 €
  • ATORN A-Shield 1 cut protection glove, size 9
    6,69 €
  • Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.
    265,68 €
  • ATORN connector set, 3 pieces, square output
    37,14 €
  • Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale
    21,36 €
  • ATORN centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5
    244,72 €
  • ATORN measuring and clamping vee blocks 80 mm w switch magnet, wooden case
    889,11 €
  • LOCTITE LB 8040 rapid rust remover 400 ml
    16,20 €
  • ATORN twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 in box
    249,34 €
  • ATORN NC machine reamer set, 3.0-12.0 mm, H7, HSSE
    218,04 €
  • ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10 mm 0.5 in box
    114,66 €
  • ATORN VDE screwdriver set, 3 pcs, cross head PH 1-3
    17,43 €
  • Long hexagon ball head pin wrench set 9 pcs in clip AF 1.5/2/2.5/3/4/5/6/8/10
    42,04 €
  • ATORN A-Mech 22 assembly glove, size 9
    2,60 €
  • ATORN A-View 5 full-vision safety goggles
    12,90 €
  • Prec. countersink set 5 pcs HSS-E Alunit d. 6.3/10.4/16.5/20.5/25.0 mm
    249,28 €
  • Multiclean cleaning cloth roll 1000 pcs 34x37 cm 2 ply blue perforated absorbent
    42,30 €
  • ATORN A-View 1 safety glasses
    8,70 €
  • Kegelsenker-Satz 90° HSS-TiAlN Form C ungl. Teilung 3 Spannflächen Ø 6,3-20,5 mm
    158,75 €
  • KNIPEX precision circlip pliers set, 8 pieces in box
    174,96 €
  • ErgoStrip universal stripping tool 0.2-4.0 mm length 135 mm right-handed
    33,03 €
  • ATORN micrometer 0-25 mm, in case
    53,00 €
  • Hexagon screwdriver set 8 pieces 2-10 mm
    120,50 €
  • Cs. + cs. deburring tool set 6 pcs 90° HSS dia. 6.3-20.5 mm in plastic box
    108,49 €
  • ATORN A-View 4 safety glasses
    5,70 €
  • ATORN hexagonal Allen key set, 9 pieces, 1.5–10 mm, ball head, colourful
    26,01 €
  • Pneumatic hose reel hose dia. 13 mm, hose length 15 m max. 20 bar
    201,51 €
  • ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD
    223,86 €
  • ATORN A-Shield 4 cut protection glove, size 9
    7,57 €
  • Inspektionskamera VideoPocket HD
    157,20 €
  • ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 and CHD
    191,10 €
  • Spiralbohrer-Satz Sprint Master 25tlg. DIN 338 HSS Ø 1,0-13,0 mm in Kassette
    101,14 €
  • Disposable safety knife SECUMAX 150
    3,09 €
  • Taschenbandmaß 411 Vario EG I Bandbreite 13 mm Länge 3 m
    30,54 €
  • ATORN HSSE machine tap set M3-12 HSSE GL
    142,40 €
  • Free-hand cutting disc, straight, universal line PSF STEELOX grit 60 125x1.0 mm
    1,97 €
  • Lamella flap disc LSZ-F Vision zirconia alumina grain 60 dia. 125 mm
    8,98 €
  • Digitales Drehmoment Testgerät, 5- 500 Nm 3/4 + 3/8 + 1/2 + 1/4 Zoll
    567,76 €
  • Wire-stripping pliers PreciStrip16 type 12 52 195
    79,02 €
  • ATORN ear defenders, 33 dB
    16,10 €
  • T-handle 416 RA T-handle Rapidaptor
    58,22 €
  • ATORN 6-piece measuring instrument set, wooden case, digital vernier callipers
    136,98 €
  • Cs. + cs. deburring tool set 6 pcs 90° HSS-E dia. 6.3-20.5 mm in metal box
    140,14 €
  • ATORN A-View 3 safety glasses
    7,70 €
  • Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H
    40,40 €
  • Adapter set 958/7
    66,90 €
  • ATORN ear defenders, 37 dB
    18,10 €
  • ATORN TX screwdriver set, 5 pcs, TX 10, 15, 20, 25, 30
    30,60 €
  • LOCTITE 270 threadlocker 50 g
    60,50 €
  • ATORN twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 and CHD
    287,56 €
  • ATORN LED magnifying lamp, 5 dioptres, 2-stage segment switching, 2.25x
    286,08 €
  • HHW twist drill bit set DIN 338 HSS type N dia. 1-13.0 mm in box
    111,94 €
  • WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade
    29,02 €
Herstellerinformationen