Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN 180° high-performance drill, SC TiAlN, 5xD 9.9 mm x 10 mm x 103 mm

ATORN 180° high-performance drill, SC TiAlN, 5xD 9.9 mm x 10 mm x 103 mm

ATORN 180° high-performance drill, SC TiAlN, 5xD 9.9 mm x 10 mm x 103 mm
Bild
Bild
Bild
Bild
Bild
Item no: 1011100 176 

Online price:

Available in 4-6 working days.

Application
For producing drill holes with a 180° hole base in one operation

Execution
Heavy-duty solid carbide drill with 180° precision grinding and drill heels

Advantage
  • drilling and counterboring in a single work step at high cutting speed
  • Innovative geometry ensures good chip removal

Notes
The maximum permissible inclination of the drilling surface is 15° correction factor = 0.25
For spot drilling, multiply feed f [mm/U] by correction factor Kf
  • Spot drill with reduced feed until the tool cuts to 0.25xD over the total ø

  • For angled spot drilling: Retract at double feed rate f [mm/U]

  • After spot drilling at reduced feed rate (correction factor), drilling continues at feed rate f [mm/U] according to recommended cutting data without correction factors

  • Setting a pilot hole is recommended for drilling on flat surfaces.


Brand: ATORN
Material to be processed: Universal use
Cutting material: SC
Surface: TiAlN
Max. drilling depth (D): 5xD
Angle of the tip: 180 Degree
Coolant supply: Internal
Tool holding device: HA parallel shank
Cutting edge diameter: 9,9 mm
Shank diameter: 10 mm
Chip flute length: 61 mm
Length: 103 mm
f steel 1000: 0,14 mm/r
Edge protection chamfer length: 0,5 mm

ATORN-No.: 12040540

EAN no.: 4050293447699

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • Pass-through ratchet with step wrench in 3/8, 7/16, 1/2, 5/8, 13/16 inch
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 9.5 mm x 10 mm x 103 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 9.8 mm x 10 mm x 103 mm
  •
    ATORN multi-range thread milling cutt. 45° SC TH/BH 2.5xD 3.0 mm 0.5 mm 48 mm HA
  •
    Steel shelf tray RAL 7035 435x250 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 8.9 mm x 10 mm x 103 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 9.2 mm x 10 mm x 103 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 9.4 mm x 10 mm x 103 mm
  •
    ATORN angular milling cutter 90 degrees 50.0 mm Z11
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 9.6 mm x 10 mm x 103 mm
  •
    ATORN SC rghng. ctr. D 16.0 x 32 x 46 x 92mm, HB shaft 4 cutting edges, ULTRA MS
  •
    ATORN SC rghng. ctr. D 12.0 x 26 x 37 x 83mm, HB shaft 4 cutting edges, ULTRA MS
Herstellerinformationen